ELEVATOR FEATURES

Characteristics
Up to 950 lb capacity (750 lb standard)*
40 f.p.m. nominal car speed
Up to 6 stops with 50 feet of floor to floor travel*
Minimum pit depth of 8 inches required (10" recommended)
Minimum overhead clearance of 8'0"required (9'6" recommended)
Up to 15 square feet interiors cab sizes available (12 ft standard)*
*Consult factory for other custom options available
Equipment
1:2 Roped hydraulic drive
(2) 3/8" diameter hoist cables
Single stage hydraulic piston and cylinder with pressure balanced self adjusting seal
Heavy duty cantilevered designed car sling with roller guide shoes
8 lb per foot steel tee guide rail system
220 volt single phase power supply
Vibration free submersible pump/motor assembly with 3 or 5 horsepower motor option
Two speed control valve with (4) solenoids, start and stop, and constant down speed regulation
Safety Devices
Type "A" instantaneous broken rope car safety
Pipe rupture valve
Upper and lower terminal limit switches
Top final limit switch
Slack cable switch
Emergency car lighting in cab
Emergency l stop switch in cab
Emergency push button alarm in cab
Automatic car re-leveling device
Floor selectable battery lowering device
Emergency manual lowering valve
Emergency telephone in cab
Solid panel cab doors with approved safety switch
Approved electro mechanical hoistway door interlocks
Rubber impact bumper below elevator car
UL and/or CSA certified electrical and hydraulic devices
Manufactured in accordance with ASME A17.1 safety code
Controls/Push Button Fixtures
Automatic pushbutton control
Microprocessor based control system with uninterrupted battery back up
Light-up push buttons in car and hall
Digital floor position indicator in car
Automatic in car light with override switch in cab
Automatic indicator light time-out feature
Automatic "Home Park" feature to designated floor
"Car Here" indicators in hall
Low oil protection timer circuit
Cab Finishes & Accessories
Cambridge series cab available in a wide variety of plastic laminate choices and other options
Solid panel accordion cab door available in a wide variety of vinyl laminate choices
36" x 48" x 80" high clear interior cab size with a variety of cab opening configurations
Brushed stainless steel handrail on one side wall
Brushed stainless steel cab control panel Options
St. Michael & Chesapeake Series cabs available in a wide variety of finishes and other options
Accordion cab doors in hardwoods, custom stain and lacquer finish aluminum, clear or bronze acrylic panels
Recessed telephone cabinet
Automatic car door operator
Polished stainless steel, brushed brass, or polished brass pushbutton faceplate handrail finishes

American Owned & American Operated © 2010 Delaware Elevator | Webmail
Site by fullcitymedia